Quilting and Embroidery Feet
Search this site
Home
Advice
More Feet..
Ordering
Contact me
If you wish to quilt or embroider with your sewing machine, the proper foot is a must. For straight-line quilting (and for working with velvets and slippery fabrics) a Walking foot will ensure that the layers do not slip and the end result is satisfactory. Most of my quilting feet are new. If you are not sure whether one of these will fit your machine, please Click here to email me.

For free-motion quilting and embroidery, you need a Hopping Foot (also called a Darning or Freemotion foot.) You do NOT need a machine with dropping feed-dogs, nor do you need a modern machine - I quilt and freemotion quite happily on a Singer treadle which has not even discovered reverse, much less anything more sophisticated...
If you have a modern electronic machine you may need to buy the manufacturers foot..check your manual

You can buy modern plastic FM feet anywhere, but I prefer metal ones...
Quarter-inch Feet are good for piecing patchwork, as they help to keep a standard seam allowance. Remember to keep your zigzag turned off...
Walking Foot for High Shank machines
QF005 Walking Foot for Domestic High Shank machines - superior quality. New; £30
Walking Foot for Slant Shank Singer machines
QF001 Walking Foot for Slant Shank Singer machines; £25
QF019 Metal Hopping foot with yarn slot; £12
Stoppax darning attachment
QF016 Stoppax darning attachment, with reproduced instructions. very rare, and great fun...£25		 Mordella Embroidery attachment
QF017 Mordella Embroidery attachment with reproduced instructions. very rare, and great fun...£25
Metal Hopping Foot - for Darning, Free-motion quilting, Embroidery etc.
QF002 Metal Hopping Foot - for Darning, Free-motion quilting, Embroidery etc. These are new and good quality, easy to use, and highly recommended.. £9-50
Oval Metal Open Toe Hopping Foot
QF003 Oval Metal Open Toe Hopping Foot £8-50		 Oval Metal Hopping Foot
QF004 Oval Metal Closed Hopping Foot £8-50
Quilt Foot
SF011 Singer Quilt Foot £5		 Bernina Foot 37
OF037 Bernina Foot 37 - 1/4 inch foot for newer type Berninas; New £9-50
Spring Needle
QF010 Spring Needle, for Free motion work £9-50
Husqvarna Clip-on Free-motion foot
QF008 Husqvarna Viking Clip-on Free-motion foot - £15		 Clip-on Free-motion foot
QF015 Clip-on Free-motion foot £12.50		 Janome (fits all low-shank machines) Free-motion foot
QF013 Janome (fits all low-shank machines) Free-motion foot £9.50
Free-motion foot for High Shank machines
HS015 Free-motion foot for High Shank machines £12.50
My address is:-
4, The Raveningham Centre, Beccles Road, Raveningham, Norfolk, NR14 6NU. United Kingdom
01508 548137