Treadle Bits And The Like
Search this site
Home
Advice
Ordering
Contact me
Please note - I do not offer items that are entirely beyond use, but it is in the nature of old machines that they get scruffy eventually. The items below are all "as seen" and you get what is in the picture.

Rubber treadle plate mat: 12-1/4 by 9-1/4 inches; £8
Rubber hand crank machine mat: 19-1/2 by 8-1/2 inches; £10
TB002 Pitman rod; £3

TB028 Singer oil pan (from 128); £3

TB024 Drive wheel: 12-1/2 inches; £10
TB003 Foot plate 12-1/2 by 9-1/2 inches; £10
TB006 Frame (from a cabinet machine); £15

TB001 Skirt guard; £10
TB027 Heavy cast oil pan: 12-1/2 by 4-1/2 (5-1/2) inches. Marked "62"; £8
TB036 Singer rear belt guide; £3

Singer curved wooden under-panel: 13-3/8 by 12-5/8 inches; £8
TB034 Singer table flap support with hinge: extends 5 inches; £7
TB030 Singer spring for the RH lifter/filler plate on a treadle (see below); £5

TB032 Singer lifter/filler plate for foldaway treadle, complete with spring and crown washer; £10
TB033: as TB032 plate only; £8
TB035 Vesta table flap support: extends 8-1/2 inches; £7

TB037 Bits from Vesta treadle; £5
TB031 Crown washer and pin from Singer lifter/filler plate; £2
TB051 Vesta treadle parts £10 lot

Motor Brackets

All £3 each
No idea what some of these fit. If you know please tell...

TB044 green
TB043 Singer green
TB042
TB041 Singer (also in light green)

TB044 Jones 942
TB040
TB039
TB038

Hand Wheels

All of these are £5 each

TB008 Later Singer: 5-1/2 inches
TB009 Early Singer: 6 inches
TB010 Jones 942: 3-3/4 inches
TB011 Harris: 3-3/4 inches

TB012 Cresta: 4-1/2 inches
TB013 Singer 185: 3-3/4 inches
TB014 Arrow: 4-1/8 inches
TB015 Singer: 4-3/4 inches

TB016 Singer (brown): 4-3/4 inches
TB017 Harris OS: 5-5/8 inches
TB023 Vesta: 6-1/4 inches
TB026 Pinnock

TB045 Singer 522: 3-3/8 inches
TB046 Hamfa: 4-7/8 inches
TB049 Italian Singer: 4-1/4 inches
TB048 Small green mystery wheel: 2-5/8 inches; £2

These pairs/sets are £6.50 each escept the Vesta set
Sizes for the big wheel.. Very heavy to post

TB019 Frister and Rossman TS: 6 inches
TB020 Federation (made by Jones): 6 inches
TB021 Vesta TS: 6-1/4 inches; £10
TB050 German Frister and Rossman clone: 6-1/8 inches

TB022 Jones CS: 6 inches
TB025 Vickers: 6 inches
TB018 Frister and Rossman "E": 6 inches
And to hold your wheel in place - clutch wheels and washers.
I have lots of these.
As they look pretty much the same I won't show all, but I can send an image of any one if required.
All £2 except the Vesta; £3

For these machines: CL001 All black Singers; CL002 Singer 201k;
CL003 Jones 942; CL004 Late Singer 15k;
CL005 Hamfa; CL006 Pinnock;
CL007 Harris; CL008 Singer 478;
CL009 Singer 185k; CL010 Arrow;
CL011 Harris OS; CL012 Vesta;
and some unidentified ones.
Washers £1

My address is:-
4, The Raveningham Centre, Beccles Road, Raveningham, Norfolk, NR14 6NU. United Kingdom
01508 548137